时间：2021-07-01 10:21:17 帮助过：17人阅读
操作系统版本：Red Hat Enterprise Linux Server release 6.5 (Santiago)
Mysql版本：MySQL-5.6.38-1.el6.x86_64.rpm-bundle.tar
keepalived版本：keepalived-1.2.7-3.el6.x86_64.rpm
node01：192.168.10.71
node02：192.168.10.72
VIP：192.168.10.70
二、配置node01为主、node02为从的主从同步
1、node01和node02分别安装好Mysql 5.6.38，安装方法请参考上一篇博文《MySQL 5.6.38在RedHat 6.5上通过RPM包安装》。
2、在node01和node02分别编辑/etc/my.cnf，配置如下：
[mysqld]
log-bin=mysql-bin
server-id = 1
[mysqld_safe]
log-error = /var/log/mysqld.log
pid-file = /var/run/mysqld/mysqld.pid
replicate-do-db = all
3、重启mysql服务
[root@node01 ~]# service mysql restart
[root@node02 ~]# service mysql restart
4、登录node01的mysql，创建用于同步的账户repl，密码为123456，并查询master状态，记下file名称和posttion数值
mysql> GRANT REPLICATION SLAVE ON *.* to ‘repl‘@‘%‘ identified by ‘123456‘;
Query OK, 0 rows affected (0.00 sec)
mysql> show master status；
5、登录node02的mysql，执行以下语句开启从服务器，注意master_host要填写node01的IP
mysql> change master to master_host=‘192.168.10.71‘,master_user=‘repl‘,master_password=‘123456‘,master_log_file=‘mysql-bin.000001‘,master_log_pos=318;
Query OK, 0 rows affected, 2 warnings (0.36 sec)
命令参数解释： master_host=‘192.168.10.71‘ ## Master 的 IP 地址 master_user=‘repl‘ ## 用于同步数据的用户（在 Master中授权的用户） master_password=‘123456‘ ## 同步数据用户的密码 master_log_file=‘mysql-bin.000001‘ ##指定 Slave 从哪个日志文 件开始读复制数据（可在 Master 上使用 show master status 查看到日志文件名） master_log_pos=429 ## 从哪个 POSITION 号开始读
mysql> start slave;
Query OK, 0 rows affected (0.03 sec)
6、查询从服务的状态，状态正常
7、在node01创建一个数据库、一个表并插入一行数据，用于测试node02是否能同步过去
mysql> create database mysql_long;
Query OK, 1 row affected (0.00 sec)
mysql> use mysql_long;
Database changed
mysql> create table test(id int(3),name char(5));
Query OK, 0 rows affected (0.13 sec)
mysql> insert into test values (001,‘jlong‘);
Query OK, 1 row affected (0.01 sec)
8、登录到node02的Mysql，同步正常
三、配置node02为主、node01为从的主从同步
1、登录node02的mysql，创建用于同步的账户repl，密码为123456，并查询master状态，记下file名称和posttion数值，并查询master状态
mysql> GRANT REPLICATION SLAVE ON *.* to ‘repl‘@‘%‘ identified by ‘123456‘;
Query OK, 0 rows affected (0.00 sec)
Query OK, 0 rows affected (0.10 sec)
2、登录node01的mysql，执行以下语句开启从服务器，注意这里master_host要填写node02的IP
mysql> change master to master_host=‘192.168.10.72‘,master_user=‘repl‘,master_password=‘123456‘,master_log_file=‘mysql-bin.000001‘,master_log_pos=318;
Query OK, 0 rows affected, 2 warnings (0.36 sec)
mysql> start slave;
Query OK, 0 rows affected (0.03 sec)
3、查询从服务的状态，状态正常
4、在node02创建一个数据库、一个表并插入一行数据，用于测试node01是否能同步过去
mysql> create database mysql_long2;
Query OK, 1 row affected (0.00 sec)
mysql> use mysql_long2;
Database changed
mysql> create table test2(id int(3),name char(10));
Query OK, 0 rows affected (0.71 sec)
mysql> insert into test2 values (001,‘jianlong‘);
Query OK, 1 row affected (0.00 sec
5、node01同步正常。
这样互为主从就配置好了，两台机既是对方的Master，又是对方的Slave，无论在哪一台机上数据发生了变化，另一台都能及时进行同步数据，下面我们开始配置keepalived实现高可用。
四、keepalived配置
1、在node01上使用yum安装keepalived
[root@node01 ~]# yum install keepalived -y
2、在node02上也使用yum安装keepalived
[root@node02 ~]# yum install keepalived -y
3、编辑node01的keepalived的配置文件
[root@node01 ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from
Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_instance VI_1 {
state BACKUP ##node01和node02都配置成BACKUP，角色由优先级确定
interface eth2
virtual_router_id 71
priority 100 ##node01的优先级设置比node02的高
advert_int 1
nopreempt ##设置不抢占（需在BACKUP状态下设置才有效）
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.10.70
}
}
virtual_server
192.168.10.70 3306 {
delay_loop 6
lb_algo wrr
lb_kind DR
nat_mask 255.255.255.0
persistence_timeout 50
protocol TCP
real_server 192.168.10.71 3306 {
weight 100
notify_down /etc/keepalived/stopkeepalived.sh #3306端口不可用则执行脚本
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 3306
}
}
}4、编辑node02的keepalived的配置文件
[root@node02 ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from
Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_instance VI_1 {
state BACKUP ##node01和node02都配置成BACKUP，角色由优先级确定
interface eth3
virtual_router_id 71
priority 90 ##node02的优先级设置比node01的低
advert_int 1
nopreempt ##设置不抢占（需在BACKUP状态下设置才有效）
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.10.70
}
}
virtual_server
192.168.10.70 3306 {
delay_loop 6
lb_algo wrr
lb_kind DR
nat_mask 255.255.255.0
persistence_timeout 50
protocol TCP
real_server 192.168.10.72 3306 {
weight 100
notify_down /etc/keepalived/stopkeepalived.sh #3306端口不可用则执行脚本
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 3306
}
}
}
[root@node02 ~]#5、node01和node02都编辑一个keepalived的自杀脚本/etc/keepalived/stopalived.sh，一旦检测到Mysql的3306端口不通，便执行此脚本触发vip的切换，脚本内容很简单，就是service keepalived stop就行，因为keepalived服务停止便会触发高可用的切换动作。
6、启动keepalived服务
[root@node01 ~]# service keepalived start
Starting keepalived: [ OK ]
[root@node02 ~]# service keepalived start
Starting keepalived: [ OK ]
7、观察node01的message日志，由于node01的优先级高，因此进入了master角色，vip也已经加上了
[root@node01~]# tail -f /var/log/messages Oct 30 22:47:46 node01 Keepalived[3170]: Starting Keepalived v1.2.7 (09/26,2012) Oct 30 22:47:46 node01 Keepalived[3171]: Starting Healthcheck child process, pid=3173 Oct 30 22:47:46 node01 Keepalived[3171]: Starting VRRP child process, pid=3174 Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: Interface queue is empty Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: Netlink reflector reports IP 192.168.10.71 added Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: Netlink reflector reports IP fe80::20c:29ff:fe20:a6c8 added Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: Registering Kernel netlink reflector Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: Registering Kernel netlink command channel Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: Registering gratuitous ARP shared channel Oct 30 22:47:46 node01 kernel: IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) Oct 30 22:47:46 node01 kernel: IPVS: Connection hash table configured (size=4096,memory=64Kbytes) Oct 30 22:47:46 node01 kernel: IPVS: ipvs loaded. Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: Opening file ‘/etc/keepalived/keepalived.conf‘. Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: Configuration is using : 63319 Bytes Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: Using LinkWatch kernel netlink reflector... Oct 30 22:47:46 node01 Keepalived_healthcheckers[3173]: Interface queue is empty Oct 30 22:47:46 node01 Keepalived_healthcheckers[3173]: Netlink reflector reports IP 192.168.10.71 added Oct 30 22:47:46 node01 Keepalived_healthcheckers[3173]: Netlink reflector reports IP fe80::20c:29ff:fe20:a6c8 added Oct 30 22:47:46 node01 Keepalived_healthcheckers[3173]: Registering Kernel netlink reflector Oct 30 22:47:46 node01 Keepalived_healthcheckers[3173]: Registering Kernel netlink command channel Oct 30 22:47:46 node01 Keepalived_healthcheckers[3173]: Opening file ‘/etc/keepalived/keepalived.conf‘ Oct 30 22:47:46 node01 Keepalived_healthcheckers[3173]: Configuration is using : 11970 Bytes Oct 30 22:47:46 node01 Keepalived_vrrp[3174]: VRRP sockpool: [ifindex(2), proto(112), fd(11,12)] Oct 30 22:47:46 node01 Keepalived_healthcheckers[3173]: Using LinkWatch kernel netlink reflector... Oct 30 22:47:46 node01 Keepalived_healthcheckers[3173]: Activating healthchecker for service [192.168.10.71]:3306 Oct 30 22:47:46 node01 kernel: IPVS: [wrr] scheduler registered. Oct 30 22:47:47 node01 Keepalived_vrrp[3174]: VRRP_Instance(VI_1) Transition to MASTER STATE Oct 30 22:47:48 node01 Keepalived_vrrp[3174]: VRRP_Instance(VI_1) Entering MASTER STATE Oct 30 22:47:48 node01 Keepalived_vrrp[3174]: VRRP_Instance(VI_1) setting protocol VIPs. Oct 30 22:47:48 node01 Keepalived_vrrp[3174]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth2 for 192.168.10.70 Oct 30 22:47:48 node01 Keepalived_healthcheckers[3173]: Netlink reflector reports IP 192.168.10.70 added
8、观察node02的message日志，node02进入了BACKUP角色，VIP自然不会加上。
[root@node02 ~]# tail -f /var/log/messages Oct 30 22:48:54 node02 Keepalived[16633]: Starting Keepalived v1.2.7 (09/26,2012) Oct 30 22:48:54 node02 Keepalived[16634]: Starting Healthcheck child process, pid=16636 Oct 30 22:48:54 node02 Keepalived[16634]: Starting VRRP child process, pid=16637 Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: Interface queue is empty Oct 30 22:48:54 node02 Keepalived_healthcheckers[16636]: Interface queue is empty Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: Netlink reflector reports IP 192.168.10.72 added Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: Netlink reflector reports IP fe80::250:56ff:fe34:ca7 added Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: Registering Kernel netlink reflector Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: Registering Kernel netlink command channel Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: Registering gratuitous ARP shared channel Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: Opening file ‘/etc/keepalived/keepalived.conf‘. Oct 30 22:48:54 node02 Keepalived_healthcheckers[16636]: Netlink reflector reports IP 192.168.10.72 added Oct 30 22:48:54 node02 Keepalived_healthcheckers[16636]: Netlink reflector reports IP fe80::250:56ff:fe34:ca7 added Oct 30 22:48:54 node02 Keepalived_healthcheckers[16636]: Registering Kernel netlink reflector Oct 30 22:48:54 node02 Keepalived_healthcheckers[16636]: Registering Kernel netlink command channel Oct 30 22:48:54 node02 Keepalived_healthcheckers[16636]: Opening file‘/etc/keepalived/keepalived.conf‘. Oct 30 22:48:54 node02 Keepalived_healthcheckers[16636]: Configuration is using : 11988 Bytes Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: Configuration is using : 63337 Bytes Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: Using LinkWatch kernel netlink reflector... Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: VRRP_Instance(VI_1) Entering BACKUP STATE Oct 30 22:48:54 node02 Keepalived_healthcheckers[16636]: Using LinkWatch kernel netlink reflector... Oct 30 22:48:54 node02 Keepalived_vrrp[16637]: VRRP sockpool: [ifindex(2), proto(112),fd(10,11)] Oct 30 22:48:54 node02 Keepalived_healthcheckers[16636]: Activating healthchecker for service [192.168.10.72]:3306
9、测试vip是否可能用来登录mysql，由于此时vip在node01上，我们就在node02上使用vip来测试登录，可见是没有问题的
五、Mysql高可用测试
1、停止node01的mysql服务，3306端口自然不通，keepalived检测到3306端口不通后执行自杀脚本停止自身服务，VIP被移除释放出来
[root@node01 ~]# service mysql stop Shutting down MySQL.. [ OK ]
2、观察node01的messages日志可以明显看出整个过程，VIP也已经不见了
[root@node01 ~]# tail -f /var/log/messages Oct 30 23:06:42 node01 Keepalived_healthcheckers[3173]: TCP connection to [192.168.10.71]:3306 failed !!! Oct 30 23:06:42 node01 Keepalived_healthcheckers[3173]: Removing service [192.168.10.71]:3306 from VS [192.168.10.70]:3306 Oct 30 23:06:42 node01 Keepalived_healthcheckers[3173]: Executing [/etc/keepalived/stopkeepalived.sh] for service [192.168.10.71]:3306 in VS [192.168.10.70]:3306 Oct 30 23:06:42 node01 Keepalived_healthcheckers[3173]: Lost quorum 1-0=1 > 0 for VS [192.168.10.70]:3306 Oct 30 23:06:42 node01 Keepalived_healthcheckers[3173]: SMTP connection ERROR to [192.168.200.1]:25. Oct 30 23:06:42 node01 kernel: IPVS: __ip_vs_del_service: enter Oct 30 23:06:42 node01 Keepalived[3171]: Stopping Keepalived v1.2.7 (09/26,2012) Oct 30 23:06:42 node01 Keepalived_vrrp[3174]: VRRP_Instance(VI_1) sending 0 priority Oct 30 23:06:42 node01 Keepalived_vrrp[3174]: VRRP_Instance(VI_1) removing protocol VIPs.
3、观察node02的messages日志，可以看到node02进入了MASTER角色，接管了VIP，VIP已经加上，从日志的时间看，切换的过程不过花了1秒，可说是秒级切换了。
[root@node02 ~]# tail -f /var/log/messages Oct 30 23:06:42 node02 Keepalived_vrrp[16637]: VRRP_Instance(VI_1) Transition to MASTER STATE Oct 30 23:06:43 node02 Keepalived_vrrp[16637]: VRRP_Instance(VI_1) Entering MASTER STATE Oct 30 23:06:43 node02 Keepalived_vrrp[16637]: VRRP_Instance(VI_1) setting protocol VIPs. Oct 30 23:06:43 node02 Keepalived_vrrp[16637]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth3 for 192.168.10.70 Oct 30 23:06:43 node02 Keepalived_healthcheckers[16636]: Netlink reflector reports IP 192.168.10.70 added
由于node01的keepalived进程被自杀脚本停止了，因此需要手动启动。之前我想是否需要跑一个监控脚本把keepalived服务自动开起来呢，后来我觉得不必要，因为如果mysql的服务依然异常，就算keepalived的服务起来了，它检测到本机的3306端口不通，还是会再次自杀。而既然mysql服务已经异常、端口都不通了，一般也是需要手动检查干预把mysql启动起来的，因此在mysql服务正常后再顺便手动起一下keepalived就好了。
本文出自 “江健龙的技术博客” 博客，请务必保留此出处http://jiangjianlong.blog.51cto.com/3735273/1981994
MySQL 5.6通过Keepalived+互为主从实现高可用架构
标签：mysql 高可用 keepalived 互为主从 mysql5.6