时间：2021-07-01 10:21:17 帮助过：51人阅读
Pass Criteria The following tests are part of the current testing suite and must pass for the Access Point to be considered compatible. ? Following in conditions of no security, WEP40 and WEP104, WPA-PSK (TKIP), WPA2-PSK (AES) ? AP associa
Pass Criteria
The following tests are part of the current testing suite and must pass for the Access Point to be considered compatible.
? Following in conditions of no security, WEP40 and WEP104, WPA-PSK (TKIP), WPA2-PSK (AES)
? AP association, Iperf UDP upload/download, Iperf TCP upload/download, DHCP, ICMP ping
In many cases there are other modes that can be run with the Access Points and the user must take caution that if the mode is not listed, then compatibility is not necessarily guaranteed. These modes are usually Greenfield use, modes being deprecated by Wi-Fi.org, or cases of limiting the use of the Access Point for more private networking purposes and not for true Wi-Fi compatibility.
Examples of special modes not necessarily part of the results:
? WPA-PSK(AES) security: WPA-PSK security is defined as using TKIP. This is a mixed mode. This mode works if the AP just auto-detects and does not mix.
? WPA2-PSK (TKIP) security: WPA2-PSK security is defined as using 802.11i with AES. This is a mixed mode. This mode works if the AP just auto-detects and does not mix.
? 802.11g only, 802.11n only, 802.11g/n only: these are private network modes (cutting out mandatory support for 802.11b). These modes may work if basic rates are limited to 1&2mbps per 802.11.
List of compatible Access Points:
*Note Tests Performed:
? Basic association with the AP (no security)
? Association with WEP security
? Association with WPA/WPA2-PSK security
? Ping test validation.