时间:2021-07-01 10:21:17 帮助过:32人阅读
路由器 +ADSL 模块 ppoe+DHCP 经典 配置 路由器 +ADSL 模块 ppoe+DHCP 经典 配置 www.2cto.com hostname Router1841 enable password cisco ip dhcp excluded-address 192.168.11.254 ip dhcp excluded-address 192.168.11.111 ! ip dhcp pool dhcp network
路由器+ADSL模块ppoe+DHCP经典配置
路由器+ADSL模块ppoe+DHCP经典配置
www.2cto.com
hostname Router1841
enable password cisco
ip dhcp excluded-address 192.168.11.254
ip dhcp excluded-address 192.168.11.111
!
ip dhcp pool dhcp
network 192.168.11.0 255.255.255.0
dns-server 202.96.69.38 202.96.64.68
default-router 192.168.11.254
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
pppoe-client dial-pool-number 1
!
dsl operating-mode auto
interface fa0/1
ip add 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Dialer0
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1429
dialer pool 1
dialer idle-timeout 0
dialer persistent
dialer-group 1
no cdp enable
ppp authentication pap chap callin
ppp pap sent-username ADSLzhangnan password 0 xtid1235
ip route 0.0.0.0 0.0.0.0 Dialer0
ip nat inside source list 100 interface Dialer0 overload
!
access-list 100 permit ip 192.168.11.0 0.0.0.255 any
dialer-list 1 protocol ip permit