时间：2021-07-01 10:21:17 帮助过：57人阅读
1 Install
wget http://www.gxlcms.com/ tar xvfz memsqlbin_amd64.tar.gzcd memsqlbin./check_systemWarning: The version of CentOS that you're using (5.5) is too low.MemSQL supports versions 6.0 and up. /home/manchun/memsqlbin/objdir/usr/local/bin/memsql-g++: /lib64/libc.so.6: version GLIBC_2.11' not found (required by /home/manchun/memsqlbin/objdir/usr/local/bin/memsql-g++)
【解决办法】安装glibc
[root@banggo ~]# wget http://www.gxlcms.com/ tar zxvf glibc-2.11.tar.gz cd glibc-2.11 mkdir glibc-2.11-build 退出去在别的目录执行如下编译 /usr/src/glibc-2.11/configure --prefix=/usr/src/glibc-2.11/glibc-2.11-build/ error: checking for .cfi_personality and .cfi_lsda pseudo-ops... no configure: error: assembler too old, .cfi_personality support missing
【解决】
参考网址
http://www.gxlcms.com/
http://www.gxlcms.com/
I couldn't overcome that problem, and I'm wondering how I can, but I said, "hey cuda only requires glibc-2.7, so lets compile that". I went ahead, and installed it into /share/apps/glibc-2.7. So here comes the main question: how can I link CUDA C to the glibc-2.7 installed in /share/apps ? Years ago, Tim Carlson has said "It is really not practical to try and upgrade glibc to 2.5. You might want to try installing a glibc 2.5 from source in /share/apps/glibc-2.5 and then use LD_PRELOAD to load that library in for you CMAQ binary.", but I don't know how to use LD_PRELOAD, and I would appreciate any guideline.
[换成2.8]
[root@banggo ~]# wget http://www.gxlcms.com/ tar zxvf glibc-2.8.tar.gz cd glibc-2.8 mkdir glibc-2.8-build
退出去在别的目录执行如下编译
/usr/src/glibc-2.8/configure --prefix=/usr/src/glibc-2.8/glibc-2.8-build/ make make install
继续执行刚才的check_system
[root@banggo memsqlbin]# ./check_system Warning: The version of CentOS that you're using (5.5) is too low. MemSQL supports versions 6.0 and up. /home/manchun/memsqlbin/objdir/usr/local/bin/memsql-g++: /lib64/libc.so.6: version 'GLIBC_2.11' not found (required by /home/manchun/memsqlbin/objdir/usr/local/bin/memsql-g++)
【】我不得不承认，我out了，仔细一看，原来需要centos 6.0的。
2 重新安装
wget http://www.gxlcms.com/ tar xvfz memsqlbin_amd64.tar.gz cd memsqlbin ./check_system
报错如下：
Warning: The recommended configuration for MemSQL is at least 8 GB of RAM
【】解决方案：
let "mem_mb=$(free -m | sed -n -e '/^Mem:/s/^[^0-9]*\([0-9]*\) .*/\1/p')";
if [ $mem_mb -lt 1000 ]; then
echo "Warning: The recommended configuration for MemSQL is at least 1 GB of RAM" 1>&2
invalid='1'
fi
[root@memdb memsqlbin]# ./check_system
System check successful3 登陆测试
[root@memdb memsqlbin]# ./memsqld --port 3308 299691 2012-06-27 13:26:26 WARNING: SSE4.2 is not supported. Resorting to software CRC32C. 497378 2012-06-27 13:26:27 INFO: Log level changed to 0 120627 13:26:27 [ERROR] Fatal error: Please run MemSQL as a non-root user or specify -u root on the command line. 120627 13:26:27 [ERROR] Aborting 120627 13:26:27 [Note] ./memsqld: Shutdown complete [root@memdb memsqlbin]# ./memsqld -u root --port 3308 292356 2012-06-27 13:26:54 WARNING: SSE4.2 is not supported. Resorting to software CRC32C. 480363 2012-06-27 13:26:55 INFO: Log level changed to 0 120627 13:26:55 [Note] ./memsqld: ready for connections. Version: '1b' socket: '/tmp/memsql.sock' port: 3308
4 客户端使用
[root@memdb ~]# mysql -uroot -p -h 127.0.0.1 -P3308 --prompt="MemSQL> " Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 253 Server version: 5.5.8 MemSQL source distribution Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved. This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to modify and redistribute it under the GPL v2 license Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. MemSQL> MemSQL> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | memsql | +--------------------+ 2 rows in set (0.00 sec) MemSQL> use memsql; Database changed MemSQL> show tables; Empty set (0.00 sec) MemSQL> use information_schema; Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Database changed MemSQL> show tables; +---------------------------------------+ | Tables_in_information_schema | +---------------------------------------+ | CHARACTER_SETS | | COLLATIONS | | COLLATION_CHARACTER_SET_APPLICABILITY | | COLUMNS | | COLUMN_PRIVILEGES | | ENGINES | | EVENTS | | FILES | | GLOBAL_STATUS | | GLOBAL_VARIABLES | | KEY_COLUMN_USAGE | | PARAMETERS | | PARTITIONS | | PLUGINS | | PROCESSLIST | | PROFILING | | REFERENTIAL_CONSTRAINTS | | ROUTINES | | SCHEMATA | | SCHEMA_PRIVILEGES | | STATISTICS | | TABLES | | TABLESPACES | | TABLE_CONSTRAINTS | | TABLE_PRIVILEGES | | TRIGGERS | | USER_PRIVILEGES | | VIEWS | +---------------------------------------+ 28 rows in set (0.00 sec) MemSQL>
库名字很mysql一模一样啊，好惊奇啊，居然information_schema都有，而且里面的表名字也是一模一样的。
5 配置文件
看看memsql有没有跟mysql类似的配置文件呢，如下，果然找到了
[root@memdb memsqlbin]# ll /root/memsqlbin/memsql.cnf -rw-r--r--. 1 1001 1001 1026 6月 18 20:07 /root/memsqlbin/memsql.cnf
6 用户管理测试
-- 创建新账号
MemSQL> grant all on *.* to tim@'%' identified by "tim" with grant option; Query OK, 1 row affected (0.01 sec) MemSQL> exit Bye
-- 重新登录，输入-p密码，进不去，不输入密码一回车，反倒进去了，怪哉!
[root@memdb memsqlbin]# mysql -utim -ptim -h 127.0.0.1 -P3308 --prompt="MemSQL> " ERROR 1045 (28000): Access denied for user 'tim'@'localhost' (using password: YES) [root@memdb memsqlbin]# mysql -utim -p -h 127.0.0.1 -P3308 --prompt="MemSQL> " Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 253 Server version: 5.5.8 MemSQL source distribution Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved. This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to modify and redistribute it under the GPL v2 license Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. MemSQL> CREATE TABLE test ( id int(11) NOT NULL AUTO_INCREMENT, excel_id varchar(100) NOT NULL, rpt_id int(10) unsigned NOT NULL, acc_std tinyint(3) unsigned NOT NULL, prd_year int(10) unsigned NOT NULL, prd_qtr tinyint(3) unsigned NOT NULL, accumulate char(3) NOT NULL, biz_cd tinyint(3) unsigned NOT NULL, acc_cd tinyint(3) unsigned NOT NULL, row_num int(10) unsigned NOT NULL, col_num int(10) unsigned NOT NULL, data_id int(10) unsigned NOT NULL, data_trace mediumtext NOT NULL COMMENT 'trace信息', trace_edit tinyint(1) NOT NULL, upd_stmp timestamp NOT NULL DEFAULT '0000-00-00 00:00:00', PRIMARY KEY (id) ) ;
以上就是MemSQL学习笔记-类似MySQL的数据库的内容，更多相关内容请关注PHP中文网（www.gxlcms.com）！