当前位置:Gxlcms > mysql > RHEL下安装MySQL

RHEL下安装MySQL

时间:2021-07-01 10:21:17 帮助过:66人阅读

1.到mysql的网站(必须到官方网站下载,防止数据被修改,纂改过)下载四个必须rpm 安装包:http://dev.mysql.com/downloads/mysql/5.0

1.到mysql的网站(必须到官方网站下载,防止数据被修改,纂改过)下载四个必须rpm 安装包:
#linux-rhel5-ia64-rpms

MySQL-client-5.1.16-0.glibc23.i386.rpm
MySQL-devel-5.1.16-0.glibc23.i386.rpm
MySQL-server-5.1.16-0.glibc23.i386.rpm
MySQL-shared-5.1.16-0.glibc23.i386.rpm

2. 通过ssh远程控制工具传到服务器上,放在适当的目录下(如:/opt/mysql/mysql5.1.16)
3.进入目录(/opt/mysql/mysql5.1.16)下安装msyql:
rpm 文件是Red Hat公司开发的软件安装包,rpm可让Linux在安装软件包时免除许多复杂的手续。该命令在安装时常用的参数是 –ivh ,其中i表示将安装指定的rmp软件包,V表示安装时的详细信息,h表示在安装期间出现"#"符号来显示目前的安装过程。这个符号将持续到安装完成后才停止。

[root@qudee mysql5.1.16]# rpm –ivh MySQL-client-5.1.16-0.glibc23.i386.rpm
[root@qudee mysql5.1.16]# rpm –ivh MySQL-devel-5.1.16-0.glibc23.i386.rpm
[root@qudee mysql5.1.16]# rpm –ivh MySQL-shared-5.1.16-0.glibc23.i386.rpm
[root@qudee mysql5.1.16]# rpm –ivh MySQL-server-5.1.16-0.glibc23.i386.rpm

 显示如下信息

warning: MySQL-server-5.1.16-0.i386.rpm: V3 DSA signature: NOKEY, key ID 5072e1f5
Preparing... ########################################### [100%]
1:MySQL-server ########################################### [100%]
PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:
/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h localhost password 'new-password'
See the manual for more instructions.

NOTE: If you are upgrading from a MySQL <= 3.22.10 you should run
the /usr/bin/mysql_fix_privilege_tables. Otherwise you will not be
able to use the new GRANT command!

Please report any problems with the /usr/bin/mysqlbug script!

The latest information about MySQL is available on the web at

Support MySQL by buying support/licenses athttps://order.mysql.com
Starting MySQL...................................[失败]

4.查看已安装的包
[root@qudee mysql5.1.20]# rpm -qa | grep -i mysql
或者 [root@qudee mysql5.1.20]# rpm -qa | grep mysql

MySQL-devel-5.1.20-0.glibc23
MySQL-shared-5.1.20-0.glibc23
MySQL-client-5.1.20-0.glibc23
MySQL-server-5.1.20-0.glibc23

5.查看[root@qudee /]# locate mysql.server 的路径
/usr/share/man/man1/mysql.server.1.gz
/usr/share/mysql/mysql.server
复制并更名 [root@qudee /]#cp /usr/share/mysql/mysql.server /etc/init.d/mysqld
6.查看[root@qudee /]# locate my-huge.cnf 的路径
/usr/share/doc/MySQL-server-5.1.16/my-huge.cnf
/usr/share/mysql/my-huge.cnf
复制并更名[root@qudee /]#cp /usr/share/mysql/my-huge.cnf /etc/my.cnf
7.启动服务:
service mysqld start
Starting MySQL [ OK ]
启动成功!恭喜~~~
8.编辑vi /etc/my.cnf 这个文件,设置字符集,支持国际化.

default-character-set=utf8 //在此添加字符集
# Here follows entries for some specific programs

# The MySQL server
[mysqld] port = 3306
#socket = /var/lib/mysql/mysql.sock
skip-locking
key_buffer = 384M
max_allowed_packet = 1M
table_cache = 512
sort_buffer_size = 2M
read_buffer_size = 2M
read_rnd_buffer_size = 8M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size = 32M


default-character-set=utf8 //在此添加字符集
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 16

先按Esc, 再同时按Shift + ; 再输入wq! (推出并保存)
呵呵! 字符集就配置好了~~~
9.MySQL默认的数据文件存储目录为/var/lib/mysql。假如要把目录移到/qudeedata/dbdata/mysql5.1.16下需要进行下面几步:
(1)、/qudeedata/dbdata目录下建立mysql5.1.16目录
cd /qudeedata/dbdata
mkdir mysql5.1.16
(2)、把MySQL服务进程停掉:
service mysqld stop
(3)、把/var/lib/mysql整个目录移到/qudeedata/dbdata/mysql5.1.16
mv /var/lib/mysql /qudeedata/dbdata/mysql5.1.16
这样就把MySQL的数据文件移动到了/qudeedata/dbdata/mysql5.1.16 下
(4)、编辑MySQL的配置文件/etc/my.cnf
为保证MySQL能够正常工作,需要指明mysql.sock文件的产生位置。修改socket=/var/lib/mysql/mysql.sock一行中等号右边的值为:
/qudeedata/dbdata/mysql5.1.16/mysql/mysql.sock 。操作如下:
命令: vi  my.cnf    (用vi工具编辑my.cnf文件,找到下列数据修改之)
# The MySQL server
[mysqld]
port   = 3306
#socket  = /var/lib/mysql/mysql.sock(原内容,为了更稳妥用"#"注释此行)
socket  = /qudeedata/dbdata/mysql5.1.16/mysql/mysql.sock   (加上此行)
(5)、修改MySQL启动脚本/etc/rc.d/init.d/mysqld
最后,需要修改MySQL启动脚本/etc/rc.d/init.d/mysqld,把其中datadir=/var/lib/mysql一行中,,等号右边的路径改成你现在的实际存放路径:
/qudeedata/dbdata/mysql5.1.16。
[root@test1 etc]# vi /etc/rc.d/init.d/mysqld
#datadir=/var/lib/mysql    (注释此行)
datadir=/qudeedata/dbdata/mysql5.1.16   (加上此行)
10、自动启动
1)察看mysql是否在自动启动列表中
[root@qudee /]# chkconfig –list
2)把MySQL添加到你系统的启动服务组里面去
[root@qudee /]# chkconfig – add mysql
11.测试通过命令是否能够启动,停止,重启
结果:

[root@qudee /]# service mysqld start
Starting MySQL [ OK ]
[root@qudee /]# service mysqld restart
Shutting down MySQL.. [ OK ]
Starting MySQL [ OK ]
[root@qudee /]# service mysqld stop
Shutting down MySQL... [ OK ]
[root@qudee /]# /etc/init.d/mysqld start
Starting MySQL [ OK ]
[root@qudee /]# /etc/init.d/mysqld restart
Shutting down MySQL... [ OK ]
Starting MySQL [ OK ]
[root@qudee /]# /etc/init.d/mysqld stop
Shutting down MySQL.. [ OK ]

证明,成功安装mysql.注:还可以通过添加,查询,删除数据库中的数据进行操作.
12.完成安装!

linux

人气教程排行