当前位置:Gxlcms > mysql > MysqlMy.ini详细说明_MySQL

MysqlMy.ini详细说明_MySQL

时间:2021-07-01 10:21:17 帮助过:10人阅读

bitsCN.com

Mysql My.ini详细说明

CLIENT SECTION

客户端章节:

[client]

port=3306 端口号=3306

[mysql]

default-character-set=latin1 默认字符编码=latin1

SERVER SECTION

服务端章节

[mysqld]

# The TCP/IP Port the MySQL Server will listen on

TCP/IP Port 监听mysql的端口号

port=3306

#Path to installation directory. All paths are usually resolved relative to this.

安装目录路径 。所有的路径都是作为这个路径的相对路径。

basedir="E:/programfile/MySql5.1/"

#Path to the database root

数据库数据的根路径

datadir="C:/ProgramData/MySQL/MySQL Server 5.1/Data/"

# The default character set that will be used when a new schema or table is

# created and no character set is defined

默认的字符集编码作用于当一个新的schema 或者表被创建的时候没有指定字符集。

default-character-set=latin1

# The default storage engine that will be used when create new tables when

默认的存储引擎作用于当创建新表的时候

default-storage-engine=INNODB

# Set the SQL mode to strict

设置严格的SQL模型

sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

# The maximum amount of concurrent sessions the MySQL server will

# allow. One of these connections will be reserved for a user with

# SUPER privileges to allow the administrator to login even if the

# connection limit has been reached.

Mysql 服务端允许最大的并发数,其中一个连接将留给用户使用超级权限连接数据库,即使连接数已经达到最高限额

max_connections=100

# Query cache is used to cache SELECT results and later return them

# without actual executing the same query once again. Having the query

# cache enabled may result in significant speed improvements, if your

# have a lot of identical queries and rarely changing tables. See the

# "Qcache_lowmem_prunes" status variable to check if the current value

# is high enough for your load.

# Note: In case your tables change very often or if your queries are

# textually different every time, the query cache may result in a

# slowdown instead of a performance improvement.

查询缓存用于在缓存中SELECT结果,返回不是实际查询数据库的结果。

从缓存中查询的结果会显著的提升查询速度,如果你有很多相同的查询和很少改变表结构。

查看“Qcache_lowmem_prunes”状态变量来检查当前值对于你的负载是否足够高。

NOTE:如果你的表结构经常改变或者,你每次查询都不相同,那么使用查询缓存结果可能不是一个性能改进。

query_cache_size=15M

# The number of open tables for all threads. Increasing this value

# increases the number of file descriptors that mysqld requires.

# Therefore you have to make sure to set the amount of open files

# allowed to at least 4096 in the variable "open-files-limit" in

# section [mysqld_safe]

所有的线程打开表的数量。

table_cache=256

# Maximum size for internal (in-memory) temporary tables. If a table

# grows larger than this value, it is automatically converted to disk

# based table This limitation is for a single table. There can be many

# of them.

临时表最大内存大小。如果一个表生长大于这个值,它会自动转换为磁盘,这只是限制单个表,可以有很多个

tmp_table_size=18M

# How many threads we should keep in a cache for reuse. When a client

# disconnects, the client's threads are put in the cache if there aren't

# more than thread_cache_size threads from before. This greatly reduces

# the amount of thread creations needed if you have a lot of new

# connections. (Normally this doesn't give a notable performance

# improvement if you have a good thread implementation.)

有很多线程我们应该保持在一个缓存里以便重用。在没有超过超过线程缓存大小之前,当一个客户端断开连接时,把客户端线程放在缓存中。如果你有很多新的连接,那么这大大降低了线程的数量创造需要。(如果你有一个好的改进线程实现方案,那么这个并不会给出一个显著的性能)

thread_cache_size=8

#*** MyISAM Specific options

MYISAM 特殊配置项

# The maximum size of the temporary file MySQL is allowed to use while

# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.

# If the file-size would be bigger than this, the index will be created

# through the key cache (which is slower).

Mysql临时文件允许使用重建索引(在修复,修改表结构,导入数据文件时)的最大大小。

如果文件大小会比这个大,该指数将被创建通过键缓存(很慢)

myisam_max_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger

# than using the key cache by the amount specified here, then prefer the

# key cache method. This is mainly used to force long character keys in

# large tables to use the slower key cache method to create the index.

如果临时文件用于快速创建索引将比使用键缓存更大,那么键缓存的方法是很好的。这主要用于在比较大型的表使用缓慢的基础上,使用长字符串创建索引。

myisam_sort_buffer_size=35M

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.

# Do not set it larger than 30% of your available memory, as some memory

# is also required by the OS to cache rows. Even if you're not using

# MyISAM tables, you should still set it to 8-64M as it will also be

# used for internal temporary disk tables.

在MyISAM表里用于缓存索引块。不要把它设置为大于你的可用内存的30%,因为一些内存还需要由OS缓存行,即使您没有使用MyISAM表,您仍然应该将其设置为8 - 64 m,因为它也会用于内部临时磁盘表

key_buffer_size=8M

# Size of the buffer used for doing full table scans of MyISAM tables.

# Allocated per thread, if a full scan is needed.

MyISAM表用来做全表扫描的缓冲区大小

如果需要一个完整的扫描,就分配给每一个线程

read_buffer_size=64K

read_rnd_buffer_size=256K

# This buffer is allocated when MySQL needs to rebuild the index in

# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE

# into an empty table. It is allocated per thread so be careful with

# large settings.

这个缓冲区是分配给:当MYSQL在需要修理,OPTIMZE,修改表结构语句以及导入加载数据

到一个空表时重建索引。它是分配给每个线程,所以在大型设置中要小心使用。

sort_buffer_size=256K

#*** INNODB Specific options ***

INNODB特殊项

INNODB保存数据目录

innodb_data_home_dir="E:/MySQL Datafiles/"

# Use this option if you have a MySQL server with InnoDB support enabled

# but you do not plan to use it. This will save memory and disk space

# and speed up some things.

#skip-innodb

# Additional memory pool that is used by InnoDB to store metadata

# information. If InnoDB requires more memory for this purpose it will

# start to allocate it from the OS. As this is fast enough on most

# recent operating systems, you normally do not need to change this

# value. SHOW INNODB STATUS will display the current amount used.

InnoDB存储元数据信息时的额外的内存池。如果需要更多的内存,InnoDB为此它会分配它的操作系统内存。因为在大多数操作系统中,这已经是足够快的了,所以通常不需要修改这个值。SHOW INNODB STATUS会显示当前的使用量

innodb_additional_mem_pool_size=2M

# If set to 1, InnoDB will flush (fsync) the transaction logs to the

# disk at each commit, which offers full ACID behavior. If you are

# willing to compromise this safety, and you are running small

# transactions, you may set this to 0 or 2 to reduce disk I/O to the

# logs. Value 0 means that the log is only written to the log file and

# the log file flushed to disk approximately once per second. Value 2

# means the log is written to the log file at each commit, but the log

# file is only flushed to disk approximately once per second.

如果设置为1,InnoDB会在每个提交磁盘冲洗事务日志,这提供了完整的ACID的行为.

如果你想安全,并且正在执行一些小操作,你可以设置为0或者2在减少磁盘I / O日志。

#innodb_flush_log_at_trx_commit=1

# The size of the buffer InnoDB uses for buffering log data. As soon as

# it is full, InnoDB will have to flush it to disk. As it is flushed

# once per second anyway, it does not make sense to have it very large

# (even with long transactions).

这个大小用于缓冲InnoDB在缓冲日志数据。一旦它满了,InnoDB会在磁盘上释放它。

它无论如何都会一秒缓冲一次,这对于非常大的日志是没有意义的。(即使有长事务)

innodb_log_buffer_size=1M

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and

# row data. The bigger you set this the less disk I/O is needed to

# access data in tables. On a dedicated database server you may set this

# parameter up to 80% of the machine physical memory size. Do not set it

# too large, though, because competition of the physical memory may

# cause paging in the operating system. Note that on 32bit systems you

# might be limited to 2-3.5G of user level memory per process, so do not

# set it too high.

InnoDB,不像MyISAM,使用一个缓冲池来缓存的两个索引和行数据。这个磁盘I / O设置的更大,需要访问的数据表更少。在专用的数据库服务器上你可以设置参数高达80%的机器的物理内存大小。不用把它设置的太大,不过,因为在操作系统中竞争的物理内存可能导致内存不够分。注意,32位系统上的你可能被限制在2 - 3.5g的用户级内存,所以不要设置的太高。

innodb_buffer_pool_size=83M

# Size of each log file in a log group. You should set the combined size

# of log files to about 25%-100% of your buffer pool size to avoid

# unneeded buffer pool flush activity on log file overwrite. However,

# note that a larger logfile size will increase the time needed for the

# recovery process.

每个日志文件在日志组里的大小。你应该将日志文件大约为25% - -100%缓冲池大小合并来避免不必要的缓冲池的缓冲行为覆盖日志文件。然而,一个大的日志文件将增加复苏过程的所需时间。

innodb_log_file_size=17M

# Number of threads allowed inside the InnoDB kernel. The optimal value

# depends highly on the application, hardware as well as the OS

# scheduler properties. A too high value may lead to thread thrashing.

InnoDB的内核允许多线程。最高性能取决于高的应用程序、硬件以及操作系统。

一个很高的值可能导致线程抖动

innodb_thread_concurrency=8

bitsCN.com

人气教程排行