时间：2021-07-01 10:21:17 帮助过：7人阅读
By Severalnines
We won’t bore you with buzzwords like volume, velocity and variety. This post is for MySQL users who want to get their hands dirty with Hadoop, so roll up your sleeves and prepare for work. Why would you ever want to move MySQL data into Hadoop? One good reason is archival and analytics. You might not want to delete old data, but rather move it into Hadoop and make it available for further analysis at a later stage.
In this post, we are going to deploy a Hadoop Cluster and export data in bulk from a Galera Cluster usingApache Sqoop. Sqoop is a well-proven approach for bulk data loading from a relational database into Hadoop File System. There is alsoHadoop Applieravailable fromMySQL labs, which works by retrieving INSERT queries from MySQL master binlog and writing them into a file in HDFS in real-time (yes, it applies INSERTs only).
We will useApache Ambarito deploy Hadoop (HDP 2.1) on three servers. We have a clustered Wordpress site running on Galera, and for the purpose of this blog, we will export some user data to Hadoop for archiving purposes. The database name is wordpress, we will use Sqoop to import the data to a Hive table running on HDFS. The following diagram illustrates our setup:
The ClusterControl node has been installed with an HAproxy instance to load balance Galera connections and listen on port 33306.
All hosts are running CentOS 6.5 with firewall and SElinux turned off. All servers’ time are using NTP server and synced with each other. Hostname must be FQDN or define your hosts across all nodes in /etc/hosts file. Each host has been configured with the following host definitions:
192.168.0.100 clustercontrol haproxy mysql192.168.0.101 mysql1 galera1192.168.0.102 mysql2 galera2192.168.0.103 mysql3 galera3192.168.0.111 hadoop1 hadoop1.cluster.com192.168.0.112 hadoop2 hadoop2.cluster.com192.168.0.113 hadoop3 hadoop3.cluster.com
Create an SSH key and configure passwordless SSH on hadoop1 to other Hadoop nodes to automate the deployment by Ambari Server. In hadoop1, run following commands as root:
$ ssh-keygen -t rsa # press Enter for all prompts$ ssh-copy-id -i ~/.ssh/id_rsa hadoop1.cluster.com$ ssh-copy-id -i ~/.ssh/id_rsa hadoop2.cluster.com$ ssh-copy-id -i ~/.ssh/id_rsa hadoop3.cluster.com
On all Hadoop hosts, install and configure NTP:
$ yum install ntp -y$ chkconfig ntp on$ service ntpd on$ ntpdate -u se.pool.ntp.org
1. Install Ambari Server on one of the Hadoop nodes (we chose hadoop1.cluster.com), this will help us deploy the Hadoop cluster. Configure Ambari repository for CentOS 6 and start the installation:
$ cd /etc/yum.repos.d$ wget http://public-repo-1.hortonworks.com/ambari/centos6/1.x/updates/1.5.1/ambari.repo$ yum -y install ambari-server
2. Setup and start ambari-server:
$ ambari-server setup # accept all default values on prompt$ ambari-server start
Give Ambari a few minutes to bootstrap before accessing the web interface at port 8080.
3. Open a web browser and navigate to http://hadoop1.cluster.com:8080. Login with username and password ‘admin’. This is the Ambari dashboard, it will guide us through the deployment. Assign a cluster name and clickNext.
4. At theSelect Stackstep, choose HDP2.1:
5. Specify all Hadoop hosts in theTarget Hostsfields. Upload the SSH key that we have generated in the Prerequisites section during passwordless SSH setup and clickRegister and Confirm:
6. This page will confirm that Ambari has located the correct hosts for your Hadoop cluster. Ambri will check those hosts to make sure they have the correct directories, packages, and processes to continue the install. ClickNextto proceed.
7. If you have enough resources, just go ahead and install all services:
8. InAssign Masterpage, we let Ambari choose the configuration for us before clickingNext:
9. InAssign Slaves and Clients page, we’ll enable all clients and slaves on each of our Hadoop hosts:
10. Hive, Oozie and Nagios might requires further input like database password and administrator email. Specify the needed information accordingly and clickNext.
11. You will be able to review your configuration selection before clickingDeploy to start the deployment:
WhenSuccessfully installed and started the servicesappears, chooseNext. On the summary page, chooseComplete. Hadoop installation and deployment is now complete. Verify that all services are running correctly:
We can now proceed to import some data from our Galera cluster as described in the next section.
Before importing any MySQL data, we need to create a target table in Hive. This table will have a similar definition as the source table in MySQL as we are importing all columns at the same time. Here is MySQL’s CREATE TABLE statement:
CREATE TABLE `wp_users` (`ID` bigint(20) unsigned NOT NULL AUTO_INCREMENT,`user_login` varchar(60) NOT NULL DEFAULT '',`user_pass` varchar(64) NOT NULL DEFAULT '',`user_nicename` varchar(50) NOT NULL DEFAULT '',`user_email` varchar(100) NOT NULL DEFAULT '',`user_url` varchar(100) NOT NULL DEFAULT '',`user_registered` datetime NOT NULL DEFAULT '0000-00-00 00:00:00',`user_activation_key` varchar(60) NOT NULL DEFAULT '',`user_status` int(11) NOT NULL DEFAULT '0',`display_name` varchar(250) NOT NULL DEFAULT '',PRIMARY KEY (`ID`),KEY `user_login_key` (`user_login`),KEY `user_nicename` (`user_nicename`)) ENGINE=InnoDB AUTO_INCREMENT=5864 DEFAULT CHARSET=utf8
SSH into any Hadoop node (since we installed Hadoop clients on all nodes) and switch to hdfs user:
$ su - hdfs
Enter into Hive console:
$ hive
Create a Hive database and table, similar to our MySQL table (Hive does not support DATETIME data type, so we are going to replace it with TIMESTAMP):
hive> CREATE SCHEMA wordpress;hive> SHOW DATABASES;OKdefaultwordpresshive> USE wordpress;hive> CREATE EXTERNAL TABLE IF NOT EXISTS users (ID BIGINT,user_login VARCHAR(60),user_pass VARCHAR(64),user_nicename VARCHAR(50),user_email VARCHAR(100),user_url VARCHAR(100),user_registered TIMESTAMP,user_activation_key VARCHAR(60),user_status INT,display_name VARCHAR(250));hive> exit;
Now we can start to import the wp_users MySQL table into Hive’s users table, connecting to MySQL nodes through HAproxy (port 33306):
$ sqoop import /--connect jdbc:mysql://192.168.0.100:33306/wordpress /--username=wordpress /--password=password /--table=wp_users /--hive-import /--hive-table=wordpress.users /--target-dir=wp_users_import /--direct
We can track the import progress from the Sqoop output :
..INFO mapreduce.ImportJobBase: Beginning import of wp_users..INFO mapreduce.Job: Job job_1400142750135_0020 completed successfully..OKTime taken: 10.035 secondsLoading data to table wordpress.usersTable wordpress.users stats: [numFiles=5, numRows=0, totalSize=240814, rawDataSize=0]OKTime taken: 3.666 seconds
You should see that an HDFS directory wp_users_import has been created (as specified in --target-dir in the Sqoop command) and we can browse its files using the following commands:
$ hdfs dfs -ls$ hdfs dfs -ls wp_users_import$ hdfs dfs -cat wp_users_import/part-m-00000 | more
Now let’s check our imported data inside Hive:
$ hive -e 'SELECT * FROM wordpress.users LIMIT 10'Logging initialized using configuration in file:/etc/hive/conf.dist/hive-log4j.propertiesOK2 admin $P$BzaV8cFzeGpBODLqCmWp3uOtc5dVRb. admin my@email.com 2014-05-15 12:53:12 0 admin5 SteveJones $P$BciftXXIPbAhaWuO4bFb4LVUN24qay0 SteveJones demouser2@54.254.93.50 2014-05-15 12:57:59 0 Steve8 JanetGarrett $P$BEp8IY1zvvrIdtPzDiU9D/br.FtzFa1 JanetGarrett demouser3@54.254.93.50 2014-05-15 12:57:59 0 Janet11 AnnWalker $P$B1wix5Xn/15o06BWyHa.r/cZ0rwUWQ/ AnnWalker demouser4@54.254.93.50 2014-05-15 12:57:59 0 Ann14 DeborahFields $P$B5PouJkJdfAucdz9p8NaKtS9WoKJu01 DeborahFields demouser5@54.254.93.50 2014-05-15 12:57:59 0 Deborah17 ChristopherMitchell $P$Bi/VWI1W4iP7h9mC0SXd4f.kKWnilH/ ChristopherMitchell demouser6@54.254.93.50 2014-05-15 12:57:59 0 Christopher20 HenryHolmes $P$BrPHv/ZHb7IBYzFpKgauBl/2WPZAC81 HenryHolmes demouser7@54.254.93.50 2014-05-15 12:58:00 0 Henry23 DavidWard $P$BVYg0SFTihdXwDhushveet4n2Eitxp1 DavidWard demouser8@54.254.93.50 2014-05-15 12:58:00 0 David26 WilliamMurray $P$Bc8FmkMadsQZCsW4L5Vo8Xax2ex8we. WilliamMurray demouser9@54.254.93.50 2014-05-15 12:58:00 0 William29 KellyHarris $P$Bc85yvlxvWQ4XxkeAgJRugOqm6S6au. KellyHarris demouser10@54.254.93.50 2014-05-15 12:58:00 0 KellyTime taken: 16.282 seconds, Fetched: 10 row(s)
Nice! Now we can see that our data exists both in Galera and Hadoop. You can also use --query option in Sqoop to filter the data that you want to export to Hadoop using an SQL query. This is a basic example of how we can start to leverage Hadoop for archival and analytics. Welcome to big data!